Bundle the cane. Weave the seat. Caned
Hainan Xinrui Furniture Co., Ltd. runs a working cane shop at Site A5 Phase 1 Dadongyang Furniture City, No. 131 Yehai Avenue, Fengxiang Subdistrict, Qiongshan District, Haikou - 570000, China (CN), where raw rattan is sorted, softened, woven into seats and finished by hand. We keep a bench open for walk-in cane repairs, and we host evening sessions so neighbours can watch a seat come together strand by strand. See how the six shop services work →
Book a cane bay visitA cane shop that treats every strand as a small piece of engineering
Walk into our workshop bays and the first thing you notice is the smell: warm rattan, a hint of linseed oil, and the green edge of fresh palm leaf used to soften a seat edge. Hainan Xinrui Furniture Co., Ltd. has built its whole trade around one idea, that a chair seat is a structure before it is a decoration. Cane is a natural material with grain, memory and a preferred direction. When a weaver ignores the grain the seat sags within a season. When a weaver respects it, the seat takes weight evenly for years and grows a deeper honey tone as the light works on it.
Our staff work in small batches. A single cane bay desk session handles one piece at a time so that each chair frame gets a slow inspection before any strand is laid. The caning row rounds are the rhythm of the day, three passes around an open seat frame with a check between each pass. The weave weeks are longer stretches of pattern work for large seat backs, bench runs and occasional restoration projects. The oil finish days close each batch with a hand rub that seals the cane, darkens the tone and locks the tension in place.
The showroom itself sits inside Dadongyang Furniture City, a busy market hall in Qiongshan District. Visitors often arrive with a tired dining chair under one arm, or with a photo of a family piece that has been in storage for a decade. We welcome both. Bring the piece if you can, and if you cannot, a clear photo and honest measurements usually get the conversation started. The address is Site A5 Phase 1 Dadongyang Furniture City, No. 131 Yehai Avenue, Fengxiang Subdistrict, Qiongshan District, Haikou - 570000, China (CN), and the phone line is open during shop hours.
What we sell is not a catalogue of mass-produced chairs. We sell a set of hands-on services, a place to bring a frame that deserves another ten years, and an evening programme where cane work is explained plainly to anyone who is curious. If that sounds like the kind of shop you have been looking for, read on, then call +19124543953 or write to furniture@xinruifurniture.lol and we will find a slot at the bench for you.
The six services that keep the shop in motion
Each service below is a real working station in our Haikou workshop, not a marketing label. Read the short notes, then open the services page for the full description of what happens at each bench.
-
Cane Bay Desk
The intake desk where a tired chair is measured, photographed and booked. We record frame condition, seat shape and the cane grade that will suit the repair, then agree a realistic timeline with the owner. It is also where walk-in visitors ask questions and where the shop decides whether a frame is worth saving or should be retired honestly.
-
Caning Row Rounds
The core weaving pass around an open seat. Cane is soaked until it bends without cracking, then laid in rows with even tension and checked after every round. This is the slowest and most visible part of the trade, and it is where a seat gains the spring that carries the body.
-
Weave Weeks
Longer scheduled blocks for pattern-heavy work such as bench backs, decorative seat medallions and restoration of family heirlooms. We set these weeks aside in advance so that a complex weave gets uninterrupted bench time and the correct humidity in the bay.
-
Oil Finish Days
The closing stage of every batch. Freshly woven cane is rubbed with a plant-based oil blend in thin coats, allowed to rest, then buffed until the amber tone sits even across the seat. Oil finish protects against Haikou humidity and brings out the natural colour of the rattan skin.
-
Frame Check Sessions
A structural review of the timber frame before and after any weave. We test joints, look for dry rot, check the seat rail for movement and advise on regluing or reinforcement. A sound frame is the difference between a repair that lasts and one that fails quietly.
-
Showroom Evenings
Open evenings in the Haikou showroom where we demonstrate a cane pass from soak to first row, answer questions about care and let guests handle the tools. They are informal, free of charge and open to anyone who wants to understand how woven furniture is actually made.
Our showroom evenings run through the week in the Haikou market hall, and every session ends with an oiled seat you can touch. Call +19124543953 to reserve a place at the long bench.
Built for Haikou weather, not for a showroom photograph
Why humidity matters here
Haikou sits in a climate that swings between heavy wet air and bright tropical sun. Cane reacts to both. A seat woven in a dry room and then moved into humid air can tighten until the strands squeak, while a seat woven in damp air can relax and lose tone. Our bays are watched for humidity across the working day, and the cane is soaked and rested on a schedule that follows the weather rather than a fixed clock.
Oil finish does the rest. A proper oil coat slows moisture exchange at the surface and gives the cane a little resilience against spills. We explain the care routine at handover so that a rebuilt seat keeps its spring for years instead of tightening into a brittle plate.
What a typical visit looks like
Most owners start at the Cane Bay Desk, where a chair is measured and the repair is scoped. From there a frame check may catch a loose joint before weaving begins. Once the frame is sound, the piece moves to the caning bench for its rounds, then to the oil finish days for sealing and buffing. If the work is pattern-heavy it is held for a weave week so it gets uninterrupted attention.
Guests who simply want to watch are welcome at a showroom evening. Bring a friend, bring a question, and bring the chair you have been meaning to fix. We would rather see the piece early than rescue it late.
- Cane repairs for dining chairs and benches
- Whole-seat rebuilds on family heirlooms
- Care advice for woven furniture in humid homes
- Small hands-on demonstrations during evening sessions
Questions we hear at the bench
Short answers to the things owners ask most often before booking a visit.
A standard dining chair seat usually takes between two and four working days at the bench, depending on the weave pattern and how much of the original frame needs attention. Pattern-heavy backs and heirloom pieces are scheduled into a weave week instead. We confirm the expected window at the cane bay desk before any work starts.
Yes, walk-ins are fine during showroom hours. A short visit is enough to measure the piece and explain the options. Larger jobs are booked after that first conversation, so you are not leaving a favourite chair behind without a clear plan for it.
We do. The bench does not care where a frame came from. What matters is whether the timber is sound enough to hold a new weave. If a frame is beyond saving we will say so plainly instead of taking on work that would fail within a year.